Rustoleum 3366 Rapid Curing Adhesion Primer

SKU
ID9872
Non Hazardous
A rapid curing 2 part solvent free epoxy primer designed to improve the adhesion of coatings.
Available in 5 Litres
£155.50 £129.58
In stock
Product Description

Rustoleum Powerfloat Epoxy Floor Primer 3366 Rapid is a 2 component, rapid curing, solvent-free, epoxy primer, specially developed to improve the adhesion of coatings to difficult substrates, in particular power-floated concrete.

Best Uses

Rustoleum Powerfloat Epoxy Floor Primer 3366 Rapid offers excellent adhesion and binding power and is best used as a part of a coating system when quick over-coating is needed, allowing for a project to be completed in just 1 day.

Excellent adhesion and binding power - recoating time of only 3 hours allows application of primer and topcoat in one day - product has a light grey finish, creating a better opacity for the following coating.

The application of Rustoleum 3366 floor primer is intended to be applied by both professional contractors and also instructed maintenance personal, and as such comes in one outer can with base and activator contained inside, the outer can then in turn becomes the mixing vessel.

  • For use on dense, smooth floors like power-floated concrete, quarry tiles and ceramic tiles
  • Product can be used in combination with all Rust-Oleum or Mathys epoxy and polyurethane coatings
  • Excellent adhesion and binding power
  • Recoating time of only 3 hours
  • Allows application of primer and topcoat in one day
  • Offers a light grey finish, creating a better opacity for the following coating
  • For use on dense, smooth floors like power-floated concrete, quarry tiles and ceramic tiles
  • Product can be used in combination with all Rust-Oleum or Mathys epoxy and polyurethane coatings

Application

Rustoleum Powerfloat Epoxy Floor Primer 3366 Rapid can be applied using a brush or roller with a touch dry time of just 1 1/2 hours that can be overcoated after a minimum of 3 hours, ready for a high performance topcoat to be applied. Theoretical coverage depends essentially on the porosity of the surface, although is usually around 6m2 per litre in normal conditions.

Surface and Environment

Rustoleum Powerfloat Epoxy Floor Primer 3366 Rapid has been designed specifically for application to power floated concrete, quarry tiles and ceramic tiles, mainly all surfaces that are smooth and lack adhesive properties. Powerfloat Epoxy Floor Primer 3366 Rapid can be used internally or externally but works best in warm conditions for an ultra fast curing period.

Technical Details
Components: Two Part
Type: Water Based
Finish: Satin
Stock Colours: Light Grey
Tintable: No
VOC Content: 30.0g per Litre
Volume Solids: 50%
Suitable Substrates: For dense, smooth floors like power-floated concrete, quarry tiles and ceramic tiles
Application Method: Brush or Roller
Theoretical Coverage: 10 m2 per litre
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 50 microns
Induction Time: -
Pot Life: 2 hours at 20°C
Touch Dry: 1.5 hours at 20°C
Overcoatable: 3 hours at 20°C
Fully Cured: 5 days at 20°C
Cleaner / Thinner: Applicators should be washed in warm soapy water before the product starts to cure. Accidental splashes of the Resin component prior to mixing with the Activator can only be removed by strong solvents such as Rust-Oleum Thinner 160
Shelf Life: 2 years
Packaging: Available in 5 Litres