Rustoleum Pre-paint Cleaner 2904 effortlessly cleans and removes removes all organic and inorganic pollution as well as degreasing all kinds of surfaces before painting. Rustoleum Pre-paint Cleaner is suitable for all types of surfaces such as floors, walls, doors, window frames, metal, windows, door frames, etc.
This special low foaming solution is ideal for cleaning and degreasing surfaces contaminated with nicotine stains. Pre-paint Cleaner leaves a clean anti-static surface to prevent the adhesion of dust and other airborne particles prior to painting and also acts as an adhesion promoter ready for painting.
Pre-paint Cleaner is an economical solution to cleaning large surfaces prior to painting as it offers a coverage rate when diluted at a rate of 20 to 1 of 100m2 per litre, although practical coverage depends on many factors such as porosity, roughness of the substrate, contamination level and dilution during application.
Shake well before use. Scrape off grease, oil, dirt and other pollution as much as possible. Dilute Rustoleum Pre-Paint Cleaner to the required mixture and apply on the surface. Rub with a brush or white nylon pad and allow to work in for several minutes if necessary. Then wipe thoroughly with a damp sponge or cloth. With stubborn soiling repeat the treatment or leave to work in longer, possibly with a higher concentration.
Because of its concentrated composition, Pre-Paint Cleaner is very economical in use. Depending on the degree of contamination, the product should be diluted in a ratio of between 1:10 and 1:100.
|Type:||Concentrated Biodegradable Cleaner|
|VOC Content:||0.0g per Litre|
|Suitable Substrates:||For floors, walls, doors, window frames, metal, windows, door frames, etc.|
|Application Method:||Brush or White Nylon Pad|
|Theoretical Coverage:||Ca. 100 m2 per litre at a dilution of 1 : 20|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||-|
|Shelf Life:||2 years unopened|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Mould and algae resistant with a high gloss finish it is fast drying even at low temperatures. Ideal for railings, lighting columns, st...
A universal heavy duty, direct to metal, waterborne, elastomeric, rust preventative paint.