Centrecoat Fast Dry Satin provided corrosion resistance and a high level of resistance to UV light, weathering and sea air for railings, lighting columns, street furniture, etc.
Centrecoat Fast Dry Satin is a single pack Lead Free hard wearing, rust-Inhibitive, corrosion resistant urethane modified alkyd offering excellent performance to weathering especially sea air. Mould and algae resistant with a satin finish. It is fast drying even at low temperatures. It is ideal for railings, lighting columns, street furniture, etc, and is available in Highways approved colour BS 381C 693 Aircraft Grey.
Centrecoat Fast Dry Satin is best used for providing a decorative finish to Steel furniture and dries quickly, even at low temperatures. One coat of Centrecoat Fast Dry Satin and you are provided with protection and a high level of resistance to UV light, weathering and Sea Air.
Fast Dry Satin from Centrecoat should be applied by brush, roller or airless spray and is touch dry within 2 hours. After 16 hours it will be ready for a recoat, however, this is not always necessary, as one coat of Fast Dry Satin Protects and Resists.
Surface & Environment
When one coat is applied, Fast Dry is suitable for light industrial environments. Although, when a second coat is applied, this paint becomes more durable and long lasting and can be used in heavier industrial exposures. Fast dry is ideal for use on railings, lighting columns, benches and various other forms of street furniture.
- Fast low temperature curing
- Contains rust inhibitors
- Lead Free
- Mould and algae resistant
- Protects and covers in one coat
- Hard wearing
- High UV resistance
- Satin finish with good gloss retention
- Resistant to salt spray
- Available in most BS and RAL colours
- Ideal for street furniture such as railings, bollards, street lighting columns, etc.
|Type:||High performance anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C)|
|Stock Colours:||Black and White|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||392.0g per Litre|
|Volume Solids:||50 - 53%|
|Suitable Substrates:||For metal surfaces, or primers 769, 569, 1060 or 3202|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||10.5 m2 per litre|
|Wet Film Thickness (WFT):||95 microns|
|Dry Film Thickness (DFT):||50 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 160 or mineral spirits|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.