Centrecoat Moisture Tolerant Primer instantly penetrates the rust to target the metal, driving out the causes of rust (air and moisture). This primer protects against corrosion and can be over coated with almost any paint system.
Centrecoat Moisture Tolerant Primer is developed specifically for steel surfaces which have been manually de-rusted and is best used for surfaces commonly exposed to high levels air, moisture and extreme weather conditions such as construction areas and coastline environments.
Centrecoat Moisture Tolerant Primer is best applied using a brush but can also be applied using a roller or spray and can be exposed for a period of up to a year without requiring a top coat.
Centrecoat Moisture Tolerant Primer is perfect for use on steel surfaces in areas with adverse weather conditions and can be applied to any steel surface to drive out water the causes of rust and protect the surface for up to a year without re-application.
|Stock Colours:||Red Brown, Light Grey RAL 7035, Black Grey RAL 7021|
|Tintable:||Yes to RAL and BS colours. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||375.0g per Litre|
|Suitable Substrates:||For direct application on slightly moist or dry metal surfaces|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||14.5 m2 per litre|
|Wet Film Thickness (WFT):||70 microns|
|Dry Film Thickness (DFT):||35 microns|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||8 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 160|
|Shelf Life:||5 years|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Mould and algae resistant with a high gloss finish it is fast drying even at low temperatures. Ideal for railings, lighting columns, st...