Rust-Oleum CombiColor 7300 Original Gloss
Rust-Oleum CombiColor 7300 Smooth Gloss is a flexible, rust inhibiting, metal topcoat and primer designed for light industrial use and is available in more than 30,000 colours.
Rust-Oleum CombiColor 7300 Smooth Gloss is an anti-rust primer and topcoat in one for interior and exterior use. Available in the Colour Shop range of 30,000 colours, CombiColor offers excellent opacity and sag resistance, leaving no brush strokes, good drying properties even at low temperatures. Once dry it remains flexible under all conditions, bending with the metal without flaking or cracking.
Best Uses
Rust-Oleum CombiColor 7300 Smooth Gloss is a decorative steel coating best used on bare, manually de-rusted or primed steel. Combicolor offers corrosion protection in a light industrial environment. For metal structures in a more aggressive industrial environment, we would recommend using Rustoleum Anti-Corrosion 3369/3380 prior to application.
Application
Rustoleum CombiColor 7300 Smooth Gloss is available in matt, satin, gloss, Hammertone and wrought iron finishes and should be applied using brush, roller or spray, like many of the other Rust-Oleum range. We would recommend using a brush when applying this paint, as you will be offered a smooth finish with no visible brush strokes.
Surface/Environment
Rust-Oleum CombiColor 7300 Smooth Gloss is a flexible, rust inhibiting, metal topcoat and primer designed for light industrial use, however, can be combined with different Rust-Oleum Primers for use in heavier industrial environments. Combicolor has been specifically designed for use on metal, in particular steel.
Features
- Long lasting flexibility
- Contains rust-inhibitive pigments
- No brush strokes
- High covering power
- can be applied on bare, manually de-rusted or CombiPrimer 3369/3380 primed metal
- Use 3202 Galvinoleum as a primer on plastic
- Suitable for light industrial use
- Available in matt, satin, gloss, hammertone and wrought iron finishes
- Heat-resistant to 90°C (dry heat), at elevated temperature's discoloration may occur
Technical Info
| Components: | One Part |
| Type: | Urethane modified alkyd |
| Finish: | Gloss |
| Stock Colours: | Many, as listed |
| Tintable: | Yes, can be tinted to over 30,000 colours, call for more info. Please note, bespoke tints are non-refundable / exchangeable. |
| VOC Content: | 477 g/l |
| Volume Solids: | 53 - 57% |
| Suitable Substrates: | For bare, manually de-rusted or with CombiPrimer Anti-Corrosion 3369/3380 primed steel |
| Application Method: | Brush, Roller, Air Atomised Spray |
| Theoretical Coverage: | 10.3 m²/l at 55 µm dry, depending on colour |
| Wet Film Thickness (WFT): | 100 µm |
| Dry Film Thickness (DFT): | 55 µm |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 2 hours at 20°C |
| Overcoatable: | After 16 hours at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | Rustoleum Thinner 160 or Rustoleum Thinner 7301 |
| Shelf Life: | 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C |
| Packaging: | Available in 1 and 5 Litres |
