Rustoleum Hard Hat NR.1 Greener Paint Stripper
Use Rustoleum Hard Hat Greener Paint Stripper on metal, wood and most mineral surfaces to remove oil paint in a quick and easy process.
Rustoleum Hard Hat Greener Paint Stripper is designed to offer quick removal of tough paint coatings in a matter of minutes. Rustoleum Hard Hat Greener Paint Stripper is available in 0.75 litres and 2.5 litre containers as well as a unique aerosol 500ml can to allow for easy application and difficult to reach places.
Best Uses
Rustoleum Hard Hat Greener Paint Stripper is best used for stripping paints in most internal and external environment all the while remaining friendly to the environment. Rustoleum Hard Hat Greener Paint Stripper can be used to remove a variety of paints and products, including emulsions, alkyds, varnishes and most 2 component tough coatings.
Application
Rustoleum Hard Hat Greener Paint Stripper can be applied using a brush when purchased in the larger container or by simple spraying motion when you select the smaller aerosol form. Rustoleum Hard Hat Greener Paint Stripper works by dissolving the product in question without the use of methylene chloride acids or alkalis, making it safer to use.
Surface and environment
Rustoleum Hard Hat Greener Paint Stripper can be used on all vertical, horizontal and sloping surfaces with varying substrates. Use Rustoleum Hard Hat Greener Paint Stripper on metal, wood and most mineral surfaces to remove oil paint in a quick and easy process.
Notes
- Remove paint in just minutes
- Paint dissolving product, without the use of methylene chloride acids or alkali's
- Better for you, better for the environment - 95% biodegradable
- Aerosol version is a Unique foam product for difficult to reach places
- Even usable on vertical substrates
- Effective with alkyds, emulsions, varnishes and most 2-component coatings
Technical Info
| Components: | Single Pack |
| Type: | Gel like paste, Dimethyl ether |
| Finish: | - |
| Stock Colours: | - |
| Tintable: | No |
| VOC Content: | 900 g/l |
| Volume Solids: | - |
| Suitable Substrates: | Metal, wood and most mineral surfaces |
| Application Method: | Brush or Aerosol |
| Theoretical Coverage: | Can: 250 - 500 g/m² = 2 - 4 m²/l, Aerosol: 2-3 m² per aerosol |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | - |
| Overcoatable: | - |
| Fully Cured: | - |
| Cleaner / Thinner: | Cleaner/Degreaser, Fresh Water or White Spirit |
| Shelf Life: | Minimum of 1 year (can) and Minimum of 2 years (aerosol) from date of production in unopened cans, if stored in dry, well ventilated areas |
| Packaging: | Available in 500ml Aerosol (packs of 6), 750ml or 2.5 Litres |
