Rustoleum CombiColor Thinner 7301

SKU
id3465
UN1263 (Class: 3, Pk Grp: III)
For use with the Rust-Oleum CombiColour product range, as a thinner or to clean up after use.
Available in 1 Litre
£13.34 £11.12
In stock
Product Description

Rust-Oleum Thinner 7301 is a thinning product designed for use with the Rust-Oleum CombiColor product range.

Best Uses

Rust-Oleum Thinner 7301 is part of the CombiColor range and is designed for use on metal. Rust-Oleum Thinner 7301 can be used to thin paints and/or cleaning up after use.

Application

Rust-Oleum Thinner 7301 provides good thinning qualities and can be mixed with CombiColor paint products, using a paddle mixer to combine. It can also be used for cleaning purposes, it is recommended for use with a tough sponge. Please read the technical data sheets for full preparation and application methods.

Surface and Environment

Rust-Oleum Thinner 7301 is designed for interior and exterior use on metal surfaces such as steel, iron and aluminium. It works in conjunction with the CombiColor paint range, if there is a requirement for thinning out before use.

Technical Details

Notes

  • For use with the CombiColor 7300 topcoats and primers
  • Brush: Use up to max 10 percent vol
  • Roller: Use up to max 10 percent vol
  • Air -atomised spray: Use up to max 10 percent vol

Technical Info

Components: One Part
Type: Thinner
Finish: -
Stock Colours: -
Tintable: No
VOC Content: 820.0g per Litre
Volume Solids: -
Suitable Substrates: -
Application Method: -
Theoretical Coverage: -
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: -
Shelf Life: 5 years
Packaging: Available in 1 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use