Rustoleum 7715 / 7778 Hard Hat Heat Resistant 750°C
Rustoleum Hard Hat 7715 / 7778 Heat-Resistant Spray is ideal for use on bare metal or slightly rusted surfaces for the protection of heat damage.
Rustoleum Hard Hat 7715 / 7778 Heat-Resistant Aerosol Spray is a cost effective way of providing heat resistance of up to 750°C at peak, to a number of different appliances. Rustoleum Hard Hat 7715 / 7778 Heat-Resistant Spray offers a quick application process and fast drying time of just 1 hour to touch.
Best Uses
Rustoleum Hard Hat 7715 / 7778 Heat-Resistant Spray is ideal for use on bare metal or slightly rusted surfaces for the protection of heat damage. Use Rustoleum Hard Hat 7715 / 7778 Heat-Resistant Spray in dry and sheltered environments, internally and externally for a continuous heat protection of around 650°C.
Application
Rustoleum Hard Hat 7715 / 7778 Heat-Resistant Spray is ideal for quick and easy application. Shake the can vigorously before use until you can hear the mixing ball rattling inside and hold the can approximately 30cm from the surface when you apply. Use a back and forth motion while shaking frequently during use.
Surface and Environment
Rustoleum Hard Hat 7715 / 7778 Heat-Resistant Spray can be used on a number of things, such as engines, steam pipes, boilers, radiators, vents, stoves and barbecues for high temperature protection.
Notes
- High temperature protection
- For continuous temperatures up to 650°C.
- Use Rustoleum-Mathys Hard Hat for peak temperatures up to 750°C.
Technical Info
| Components: | Aerosol |
| Type: | Silicone modified alkyd resin. Based on lead- and chromate free pigments |
| Finish: | Satin |
| Stock Colours: | Black 7778 and Aluminium 7715 |
| Tintable: | No |
| VOC Content: | 650 g/l |
| Volume Solids: | - |
| Suitable Substrates: | New, bare steel, blasted steel or light rusted steel surfaces |
| Application Method: | Aerosol Spray |
| Theoretical Coverage: | 2 m² per spray can at 25 μm dry |
| Wet Film Thickness (WFT): | 100 μm |
| Dry Film Thickness (DFT): | 25 μm |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 1 hour at 20°C |
| Overcoatable: | Within 1 hour or after 48 hours |
| Fully Cured: | 24 hours after minimum service temperature of 150°C has been reached |
| Cleaner / Thinner: | - |
| Shelf Life: | Minimum of 3 years from date of production in unopened cans, if stored in dry, well ventilated areas |
| Packaging: | 500ml Aerosol Cans |
