Coo-Var Heat Resistant Black Enamel
Coo-Var Heat Resistant Black Enamel is a high quality enamel for use at temperatures up to 600°C indirect heat.
Best Uses
Coo-Var Heat-Resistant Black Enamel is ideal for use in areas prone to heat. May be used as a single coat for fire surrounds, radiators, hot pipes and more. Able to withstand indirect heat up to 600°C.
Available in gloss black.
Application
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with Coo-Var Universal Degreaser before de-rusting.
Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
Mix well before use. Apply via brush or roller.
| Components: | Single Pack |
| Type: | Solvent Based |
| Finish: | Satin or Gloss |
| Stock Colours: | Black |
| Tintable: | No |
| VOC Content: | 499 g/L |
| Volume Solids: | 45% |
| Suitable Substrates: | For fire surrounds, radiators, hot pipes and more |
| Application Method: | Brush, Roller |
| Theoretical Coverage: | 12 m2 per litre at 38 microns |
| Wet Film Thickness (WFT): | 80 microns |
| Dry Film Thickness (DFT): | 38 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 10 - 20 minutes at 20°C |
| Overcoatable: | |
| Fully Cured: | |
| Cleaner / Thinner: | Teamac Thinners 16 |
| Shelf Life: | See container |
| Packaging: | Available in 5 Litres |
