Rustoleum 7100 NS Anti Slip Floor Paint is a medium duty industrial floor paint designed for use on concrete (over 2 years old), steel, timber and existing cured coatings. It is important to ensure that your employees are working in a safe and hazard free environment which can be easily achieved thanks to Rustoleum 7100 NS Anti Slip Paint. Injuries caused by slips and falls can be quite severe so make sure that you take advantage of this fantastic anti slip paint which is the perfect way to make sure your work environment is a safe place for your employees to work in. It is a solvent based (white spirit) paint ready for use on exterior and interior floors. Rustoleum 7100 NS Non Slip floor paint provides a non slip coating to flooring with resistance to abrasion, neutral detergents, oils, fuel and petrol for short periods.
Rustoleum 7100 NS Anti Slip Paint is best used in environments that are prone to spillages and accidents, where a non slip surface is a necessity. It is ideal for industrial premises, factories with machinery, warehouses, shops, steps, workshops and anywhere that requires a hazard free, anti slip zone. This reputable brand offers the perfect solution for both interior and exterior surfaces as it provides a non slip solution ideal against the majority of weather conditions.
Rustoleum 7100 NS Non Slip paint is best applied by brush or roller and can be used internally or externally. First apply one coat of 7100 NS non slip paint before recoating the floor after 24 hours to offer prime performance.
Rustoleum 7100 Non Slip floor paint is ideal for industrial premises, factories around machinery, workshops, showrooms, warehouses, shops, steps, stairways and line markings. Non Slip floor paint is designed for all kind of surfaces including, concrete, steel and timber. Remember this product is ideal for both interior and exterior uses in both domestic and commercial settings.
|Type:||Solvent based Alkyd|
|Stock Colours:||Transparent, Traffic Yellow, Black, Light Grey and Steel Grey|
|VOC Content:||456 g/l|
|Volume Solids:||36 - 40%|
|Suitable Substrates:||Concrete floors older than 2 years and correctly prepared and primed metal floors|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||8,0 m²/l at 50 μm dry|
|Wet Film Thickness (WFT):||130 μm|
|Dry Film Thickness (DFT):||50 μm|
|Touch Dry:||6 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||1 week at 20°C|
|Cleaner / Thinner:||If required thin sparingly with 10% volume 7301. Clean equipment immediately after application using 7301|
|Shelf Life:||5 years from date of production unopened|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Anti-slip aggregate additive for floor paint, can be added to most floor paints to aid slip resistance.