Rustoleum Floorcoat PU 7200 is a single pack solvent based urethane modified alkyd floor paint that has been formulated for easy application to dry cured concrete as well as wood and masonry. Rustoleum 7200 floor paint is suitable for application interior and exterior surfaces such as warehouse floors, workshops, garages as well as wooden decking and flooring.
An easy to apply paint coating which can also be used as a line marking paint. 7200 offers good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and offers short time resistance against lubricating oils, fuel, petrol etc.
Rustoleum Floorcoat PU 7200 is suitable for application to directly to poured or tampered concrete floors, subject to correct surface preparation. A huge benefit offered by 7200 floor paint is that due to its micro porous qualities it can be applied to wooden floors and masonry which are completely clean and dry. 7200 floor paint can be applied to smooth and dense power floated concrete floors providing the floor has been correctly prepared with a Blast Track machine. The use of a suitable adhesion primer such as Rustoleum 7201 for concrete that is older than 28 days but less than 2 years old.
7200 floor paint is not suitable for application to concrete containing a damp repellent additive, which will prevent a good adhesion. Rustoleum Floorcoat PU 7200 can also be applied on existing well adhered paint coatings that have been prepared as well as being suitable for metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.
Rustoleum are an industry leading floor paint manufacturer that are driving the market in terms of quality and life length. Their products are durable and long lasting so are sure to last for many years to come. We stock a wide range of Rustoleum products for you to choose from.
If you have any questions about our garage floor paint range, or about a specific product, please get in touch today on; 01462 421 333. Our team of experts will be able to help and advise you on achieving the highest quality finish for your garage floor.
|Type:||Hard-wearing, easy to apply single pack floor coating with PU addition|
|Finish:||Gloss or Satin|
|Stock Colours:||RAL 1023, RAL 7035, RAL 7001, RAL 9010 and English Red|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||450.0g per Litre|
|Suitable Substrates:||Can be applied directly on concrete floors (see surface preparation), wooden floors and masonry which are completely clean and dry|
|Application Method:||Brush, Roller, Air Atomised Spray|
|Theoretical Coverage:||9 m2 per litre|
|Wet Film Thickness (WFT):||110 microns|
|Dry Film Thickness (DFT):||50 microns|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 633|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Contains everything you need to professionally apply paint to floors - except the paint!