Rustoleum Non-Skid Additive's can be used on a variety of different floors, internally or externally to provide a non slip coating. Available in various grades.
Rustoleum Non-Skid Additive is a product based on thermally split flint stones that can be applied directly into a liquid coating or broadcasted over the final wet finish.
Rustoleum's range of Non-Skid Additives have been formulated to be used with floor coatings. A high quality additive, used to aid the protection of floors in industrial and commercial environments.
Rustoleum Non-Skid Additive is available in 1 kg tins and can be added to 5 litres of paint to produce a high performance anti skid finish.
For Sprinkling: sprinkle the granulates onto the freshly applied, wet RUST-OLEUM coating, manually with a "sprinkler-box" for small areas, or with special low-pressure spraying equipment with a nozzle opening of at least 18 mm ; air pressure between 1 - 3 bars.
For Mixing: mix the granulates into the wet coating material and apply the coating with a roller or a brush (not by spraying), stir regularly to avoid settling of the granulates.
- For coating systems with a dry film thickness less than 300 μm it is recommended to use NS 200
- For One Pack Paints, use NS100
Surface and Environment
Rustoleum Non-Skid Additive can be used on a variety of different floors, internally or externally to provide a non slip coating. Rustoleum Non-Skid Additive is highly durable and offers strong abrasion resistance when applied to floor paint products. Rustoleum Non-Skid Additive can be applied to a number of different substrates including, concrete, stone and wood.
- Rustoleum Non Skid Additives
- Non-slip floor additive based on thermally split flint stones
- Can be added directly to the liquid coating or broadcast over the final wet finish
- For average finish add 1Kg. tin to 5 litres of paint
- Particle size: 45 - 75 μm. The use of this additive reduces the gloss level of the respective coating.
- For coating systems with a dry film thickness less than 300 μm it is recommended to use NS 200.
- For 1K-paints, use NS100
|Type:||Granulates - Non skid additives|
|Stock Colours:||Beige, Black or White|
|Suitable Substrates:||NS100 is intended to be added to 1K floor paints: 200 and 300 are intended to be added to 2K floor Coatings|
|Application Method:||Mix the granuals in to the wet paint material and apply the coating with a Brush or Roller (not by spraying)|
|Theoretical Coverage:||NS100: 30g per 1L of paint, NS200/300: Sparingly: 20 m²/kg, NS500: Sparingly: 5 m²/kg,|
|Particle Size::||NS100: 100 -200 μm, NS200: 0.2 - 0.5 mm, NS300: 0.5 - 1.0 mm|
|Shelf Life:||5 years from date of production unopened|
|Packaging:||Available in various sizes|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.