Rustoleum Chalky Floor Paint

Non Hazardous
An easy to use water-based, durable floor paint for interior use.
Available in 2.5 litre tins
From £34.13 £28.44
In stock
Only %1 left
Product Description

Rust-Oleum Chalky Finish Floor Paint is an easy to use water based, durable floor paint for interior use. Adds a low sheen chalk finish to wood and concrete flooring.

Rust-Oleum Chalky Finish Floor Paint can be used on wood or concrete flooring and can be applied directly over previously painted or varnished surfaces to providing a durable smooth matt finish which will resist knocks and scratches.

Best Uses

Use Rust-Oleum Chalky Finish Floor Paint on concrete floors or wooden floorboards to enhance your floor with a classic low sheen chalk finish. Suitable for interior floors only in areas not subject to regular water contact. Not suitable for exterior use.

Technical Details


  • Highly concentrated.
  • Can be applied over old paint and varnish.
  • Interior use only.
  • Not suitable for use in bathrooms or in areas subject to regular water contact.
  • Not suitable for use on tiles or laminate flooring.

Technical Info

Components: Single Pack 
Type: Water Based
Finish: Matt
Stock Colours: Anthracite, Chalk White, Winter Grey
Tintable: No
VOC Content: Low
Volume Solids: -
Suitable Substrates: Suitable for wooden floorboards or concrete flooring.
Application Method: Brush or Roller
Theoretical Coverage: Up to 14 sq/m per litre 
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: Between 1- 4 hours at 20°C
Overcoatable: After 4-8 hours at 20°C
Fully Cured: After 7 days
Cleaner / Thinner: -
Shelf Life: 2 years from production in unopened tins - Always check the tin for expiry dates
Packaging: Available in 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use