Bedec Water Based Acrylic Varnish is a water based varnish manufactured on an acrylic resin which will not embrittle on ageing. Bedec Water Based Acrylic Varnish is available in clear matt, clear gloss and clear satin.
Bedec Water Based Acrylic Varnish can be used on all kinds of interior woods to provide a clear varnished coating that revitalises the woods surface all the while protecting it from dust and different spillages. Designed for application to most substrates including wood, non-ferrous metals, and most types of plastic.
Bedec Water Based Acrylic Varnish can be applied using brush, roller or spray and has a theoretical coverage rate of 13-15m2 per litre. Bedec Water Based Acrylic Varnish should not be applied in temperatures below 8°C and when applied at temperatures of 18°C or above, it will be dry in 2 hours ready for a recoating after 4 hours.
Surface and Environment
Bedec Water Based Acrylic Varnish is designed for internal use on wooden furniture, and can be used on a number of different substrates including, timber, mahogany and oak.
- Bedec water based varnish manufactured on acrylic resin, which does not embrittle on ageing.
|Finish:||Gloss, Satin or Matt|
|Suitable Substrates:||Designed for application to most substrates including wood, non-ferrous metals, and most types of plastic.|
|Application Method:||Brush, Roller or spray|
|Theoretical Coverage:||Approximately 13-15 sq. metres/litre. depending on porosity and texture of the substrate|
|Application Temperature:||Do not apply at temperatures below 8°C|
|Touch Dry:||2 hours at 18°C and 65% humidity|
|Overcoatable:||After 4 hours at 18°C|
|Flash Point:||Not applicable|
|Cleaner / Thinner:||Clean with warm soapy water|
|Shelf Life:||Protect from frost|
|Packaging:||Available in 2.5 & 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.