Bedec High Obliterating Matt has been formulated to be easily applied by brush, roller or airless spray, often in one coat, to breeze block, brickwork and plaster walls and is suitable for renovating acoustic ceiling tiles.
Bedec Aqua Advanced High Obliterating Matt has been formulated as a high build high obliterating water based matt finish paint that is suitable for use on internal walls and ceilings. Bedec Aqua Advanced High Obliterating Matt is suitable for use on to infill block and brickwork offering a smoother surface where cost of rendering or plastering is not required. Aqua Advanced is a system providing good coverage to most surfaces though very porous substrates often require a further coat. Aqua Advanced is ideally suited to interior applications such as walls and ceilings in warehouses, stockrooms, factories, etc., over suitably prepared surfaces.
Aqua Advanced High Obliterating Matt provides a smoother surface where the cost of rendering and plastering is prohibitive. High Obliterating Matt is available in white and other colours such as magnolia (special order), making it ideal for use on factory, warehouse and stockroom walls as well as stables, barns and agricultural buildings.
Bedec Aqua Advanced High Obliterating Matt should be used on surfaces which are clean and free from wax, grease, oil, dust and loose particles. Bare surfaces should be primed with an appropriate primer or priming technique. Ensure new plaster and cement is dry before application.
Ensure the surfaces to be painted are clean dry and free from dust, dirt grease and wax. Remove all loose and defective paint. Algal, fungal or mould growths should be removed and treated with a fungicidal wash. Smooth glossy surfaces should be lightly abraded to provide a key. On unpainted cement, render, plaster, brick work
or any porous substrate the first coat should be thinned with 20-30% clean water. New plaster and cement should be allowed to dry thoroughly before application.
Where there is a risk of staining (Extractive discolouration) treatment with Bedec Stain Block is recommended. It is always advisable to test for staining by applying High Obliterating Vinyl Matt to a small area first.
Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C. On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.
Bedec Aqua Advanced High Obliterating Matt is suitable for internal walls and ceilings. It is designed to infill block and brickwork, providing a smooth surface.
|Type:||Water based Vinyl Matt Emulsion|
|Tintable:||Upon Special Request, Depending on Quantity. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||30.0g per Litre|
|Suitable Substrates:||For Interior Cement, Render, Plaster and Brickwork|
|Application Method:||Brush, Roller, Conventional H.V.L.P or Airless Spray|
|Theoretical Coverage:||10 -12 m2 per litre per coat|
|Wet Film Thickness (WFT):||90 microns|
|Dry Film Thickness (DFT):||38 microns|
|Touch Dry:||2 - 4 hours at 18°C|
|Overcoatable:||4 hours at 18°C|
|Cleaner / Thinner:||Clean up with warm soapy water|
|Shelf Life:||24 months|
|Packaging:||Available in 2.5, 5 and 20 (4 x 5) Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.