Bedec Interior-Flex Elastomeric Matt Emulsion is a flexible paint formulated to bridge hairline cracks, is microporous to allow the surface to breathe.
Bedec Interior-Flex Elastomeric Matt Emulsion is a unique Interior Wall Paint designed to bridge hairline cracks and flex with the substrate where movement causes cracking with conventional matt emulsion. Interior-Flex is an elastomeric matt emulsion paint formulated to coat interior ceilings and walls. Interior-Flex is wipeable, microporous and Breathable.
Bedec Interior-Flex Elastomeric Matt Emulsion is best used on interior walls and ceilings to produce a smooth matt finish. Bedec Interior-Flex Interior Wall Paint is available in magnolia and white and is tintable to pastel colours if you wish to do so.
- Interior-Flex will bridge hairline cracks
- Flexible, Microporous, Crack Bridging and Breathable
- Smooth Matt Finish
- Water based
- Wipeable when dry
- Excellent Coverage
- Available in White and Magnolia
- Tintable to pastel colours.
Bedec Interior-Flex Elastomeric Matt Emulsion can be applied using brush and roller to provide a brilliant, decorative finish. Ensure the surfaces to be painted are clean dry and free from dust, dirt grease and wax. Remove all loose and defective paint. Algal and fungal growths should be removed and treated with a fungicidal wash. Untreated render, plaster, brickwork or any porous substrate should be thinned with approximately 30% - 40% fresh clean water.
Where there is a risk of staining (Extractive discolouration) treatment with Bedec Interior Exterior Stain Block is recommended. It is always advisable to test for
staining by applying Interior-Flex to a small area first.
Cracks should be repaired as follows:-
1. Large cracks - Cut out and fill with a flexible interior filler.
2. Hair line cracks - Apply Interior-Flex into the cracks and feather out to give a smooth edge. One or two additional coats maybe needed to complete bridging.
After the cracks have been treated one or two coats of Interior-Flex should then be applied over the complete area.
Surface and Environment
Bedec Interior-Flex Elastomeric Matt Emulsion is a flexible, microporous substance that lets the surface breathe. Bedec Interior-Flex offers fine crack bridging internally to reproduce that new look on your walls and ceilings.
|Type:||Water Based Emulsion|
|Finish:||Smooth Low Sheen|
|Stock Colours:||Magnolia and White|
|Tintable:||Upon Special Request, Depending on Quantity. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||30.0g per Litre|
|Suitable Substrates:||For Interior Ceilings|
|Application Method:||Brush, Roller, Conventional H.V.L.P or Airless Spray|
|Theoretical Coverage:||9 -11 m2 per litre per coat|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||38 microns|
|Touch Dry:||2 - 4 hours at 18°C|
|Overcoatable:||4 hours at 18°C|
|Cleaner / Thinner:||Clean up with warm soapy water|
|Shelf Life:||24 months|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.