Centrecoat Metal Primer for Mobile Homes 10 Litres is best used for application to the outside of mobile homes and caravans and offers easy application along with quick drying times. Centrecoat Metal Primer for Mobile Homes 10 Litres is best used when overcoated with Centrecoat Mobile Home and Caravan Paint.
Centrecoat Metal Primer for Mobile Homes 10 Litres can be applied using brush, roller or airless spray and has a matt finish. With ultra quick drying times, Centrecoat Metal Primer for Mobile Homes is touch dry in just 3- minutes and ready to recoat within 1 hour. Centrecoat Metal Primer for Mobile Homes 10 Litres has a theoretical coverage rate of 12.5m2 per litre and 125m2 approximately per container, when applied in the right conditions.
Centrecoat Metal Primer for Mobile Homes 10 Litres should be applied to galvanised metal and sound plastic cladding and has been specifically designed for use on mobile homes and caravans. Centrecoat Metal Primer for Mobile Homes provides a protective undercoating ready for the outdoor environment and has the appropriate adhesion properties to be overcoated with Centrecoat Mobile Home and Caravan Paint., Rust-Oleum Pegacryl, Rust-Oleum Paracem and other metal cladding topcoats.
|Stock Colours:||White, Light Grey, RAL 7011|
|VOC Content:||14.0g per Litre|
|Suitable Substrates:||For bare or blasted steel, galvanised steel, zinc, aluminium and steel protected by plastisol|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||12.5 m2 per litre|
|Wet Film Thickness (WFT):||80 microns|
|Dry Film Thickness (DFT):||35 microns|
|Touch Dry:||30 minutes at 20°C|
|Overcoatable:||After 1 hour at 20°C|
|Fully Cured:||3 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. Keep from freezing|
|Packaging:||Available in 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.