Rustoleum Pegacryl Satin

SKU
id3528
Non Hazardous
Water based paint for woodwork and metal, UV resistant paint.
Available in 2.5 Litres. Tintable to thousands of RAL and BS Shades.
From £43.16 £35.97
In stock
Only %1 left
Product Description

Rustoleum Pegacryl Satin is a satin gloss decorative water-based paint for indoor and outdoor use on a number of substrates. Primarily a white satin paint, Pegacryl is also available in a wide range of other colours on request.

Best Uses

Rustoleum Pegacryl Satin is best used for providing a protective coating that works well to resist UV light and provides excellent durability to the surface once it has been applied. Rustoleum Pegacryl Satin offers great hiding power for covering small stains and abnormalities on different substrates.

Application

Rustoleum Pegacryl Satin can be applied using brush or roller for a touch dry finish in just 1-2 hours based on conditions of 20°C. Rustoleum Pegacryl Satin has a theoretical coverage rate of 9-12m2 per litre and can be applied directly to old sound paints, whereas glossy paints should be light sanded first.

Surface and Environment

Rustoleum Pegacryl Satin is suitable for indoors and outdoors on a variety of different metal, wood and concrete substrates. Rustoleum Pegacryl Satin can be used to decorate and protect interior and exterior surfaces including, sheds, fences, gates, doors, soffits, fascias, walls as well as furniture.

Technical Details

Features

  • Rustoleum Pegacryl Satin water based paint for Woodwork and Metal.
  • Excellent durability and UV proof.
  • Use Pegacryl Satin indoors and outside.
  • Excellent flow.
  • High filling power.
  • Offers good hiding power.
  • Water borne.
  • Apply directly on old sound paints; glossy paints should be lightly sanded.
Components: Single Pack
Type: Water Based
Finish: Satin
Stock Colours: Just tints
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 130 g/L
Volume Solids: 31 - 34%
Suitable Substrates: For internal and external woodwork etc.
Application Method: Brush, Roller, Air Spray or Airless Spray
Theoretical Coverage: 9 - 12 m2 per litre
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 35 microns
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: After 24 hours at 20°C
Fully Cured: 2 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 0.75, 2.5 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use