Rustoleum Pegagraff Hydro

SKU
id770
Non Hazardous
A colourless, water based, abrasion and solvent resistant anti-grafitti varnish.
Available in 2.5 and 5 Litres
From £51.37 £42.81
In stock
Only %1 left
Product Description

Rust-Oleum Pegagraff Hydro is a clear anti-graffiti coating for floors, walls and interior surfaces.

Rust-Oleum Mathys Pegagraff Hydro is a colourless, water based, abrasion and solvent resistant anti graffiti varnish. Its resistance to solvent means most graffiti can be removed quickly and efficiently with the use of appropriate solvents. Anti-Graffiti Paint provides protection to façades and buildings that are susceptible to graffiti. Pegagraff Hydro is a two-component, satin gloss, water-borne, polyurethane acrylic, anti-graffiti paint.

Best Uses

Pegagraff Hydro Anti-Graffiti Paint is used for the protection of painted substrates on floors, walls and interior surfaces, against graffiti attack. It should not be used on unpainted or untreated substrates unless it is reinforced concrete. Please see the Pegagraff Hydro product data sheet for more information - or call Promain office for more details - 01462 421 333.

Application

Apply on a clean, dry and degreased substrate. Glossy and satin surfaces should be 'roughened up' prior to application. Application to Pegagraff Hydro on Murfill, should initially be insulated with a coat of Rust-Oleum Paracem. When repainting surfaces already protected with Pegagraff Hydro, an adhesion primer (Pegalink) should be applied first. Always apply in a well ventilated place. Pegagraff Hydro Anti-Graffiti Paint can be applied using airless or conventional spray guns and all types of brushes. We would recommend a short hair roller, if that is the preferred method of application. Pegagraff Hydro should not be diluted.

Surface and Environment

Rust-Oleum Mathys Pegagraff Hydro is the ideal anti graffiti protection for façades and buildings that are susceptible to graffiti or those at high risk of graffiti attack.

Technical Details

Notes

  • Pegagraff Hydro provides a colourless anti-graffiti protection for many substrates
  • Exceptionally abrasion resistant
  • Easy to apply and clean
  • Can also be used as a colourless varnish for internal walls
  • UV Resistant
  • Can be removed with Rustoleum Pegagraff Hydro Cleaner

Technical Info

Components: Two Part
Type: Waterborne polyurethane acrylic lacquer
Finish: Satin
Stock Colours: Transparent
Tintable: No
VOC Content: 20.0g per Litre
Volume Solids: 40%
Suitable Substrates: For floors, walls and interior surfaces
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: 5-8 m2 per litre
Wet Film Thickness (WFT): 125 microns
Dry Film Thickness (DFT): 50 microns
Induction Time: -
Pot Life: 2 hours at 20°C
Touch Dry: 2 hours at 20°C
Overcoatable: After 5 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: At least 1 year from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 2.5 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use