£9.95 delivery on orders excluding certain products & postcodes *
Coo-Var P101 is a two pack Anti-Graffiti Paint Coating designed for walls and ceilings. Also suitable for coating clear roof sheets and roof lights. P101 is a clear polyurethane paint coating providing excellent graffiti resistance on interior and exterior surfaces. Anti-Graffiti Coatings are ideal for use in areas where there is a high risk of graffiti. Coo-Var P101 Anti-Graffiti Paint Coating can also be tinted to most BS and RAL colours.
Coo-Var P101 Anti-Graffiti Paint for Walls and Ceilings is best for use to protect walls and areas such as bridges, statues and other surfaces which may be prone to graffiti vandalism. Coo-Var P101 Anti-Graffiti Paint should be used in areas with a high level of hygiene and chemical contact. This Anti-Graffiti Coating can be used over compatible water based paints to provide a protective glaze over the colour. Coo-Var P101 Anti-Graffiti Coating should not be used over conventional solvent based paints.
P101 from Coo-Var is an anti graffiti paint that should be applied using a brush or short haired roller. It can also be applied using a spray, given the right conditions - however, we would recommend that spraying should be avoided if possible. Coo-Var P101 Anti-Graffiti Paint Coating can apply directly onto the surface.
Coo-Var P101 Anti Graffiti Coating is designed for use in areas with a high level of hygiene requirements, chemical contact, or surfaces subject to graffiti attack. It is ideal for use on areas such as walls, bridges, statues, and public toilets, with a range of different surfaces.
Components: | Two Part |
Type: | Aliphatic Polyurethane |
Finish: | Gloss |
Stock Colours: | Clear |
Tintable: | No. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 498.0g per Litre |
Volume Solids: | 47% |
Suitable Substrates: | For bridges, statues, walls, toilets and more |
Application Method: | Brush, Short Haired Mohair Roller or Airless Spray |
Theoretical Coverage: | 35 - 40 m2 per 5 Kg pack at 75 microns |
Wet Film Thickness (WFT): | 120 - 135 microns |
Dry Film Thickness (DFT): | 65 - 75 microns |
Induction Time: | - |
Pot Life: | 6 - 8 hours at 20°C |
Touch Dry: | 3 - 4 hours at 20°C |
Overcoatable: | After 16 hours at 20°C |
Fully Cured: | 5 - 7 days at 20°C |
Cleaner / Thinner: | Do not thin |
Shelf Life: | 2 years unopened in original packaging |
Packaging: | Available in 5 Kg |