£9.95 delivery on orders excluding certain products & postcodes *
Coo-Var GP101 Graffiti & Fly Posting Protection System can be used on a wide range of clean prepared rough or smooth surfaces, whilst continuing to retain the appearance and aesthetics of the original surface. This product is also formulated to prevent permanent marking by graffiti, which can easily be cleaned using water or mild cleansing agents.
GP101 also makes Fly Posters easy to remove. Posters just peel off and graffiti can be removed quickly and easily with water or water with mild detergent.
Remove existing graffiti with dedicated graffiti removal agents when required. Ensure that the substrate is free of any residue from graffiti removal agents. The surface must be clean, sound and free of any dust, dirt, oil and grease. If necessary, wash substrate with high pressure water and allow to dry.
Adhesion should be checked over all surfaces as follows to ensure suitability of GP101: -
Dab GP101 with a small rag onto a small area of substrate (5-10cm² is sufficient) and allow to dry overnight. For signage and murals, after sufficient dry time has elapsed, rub firmly across the test area with finger for loss of adhesion.
For other painted surfaces, rub firmly with a rag soaked with Thinners 14, then rub the surface by hand. If there is no evidence of GP101 peeling off the surface is compatible.
Stir well before use and use manageable quantities; Pour a small quantity into roller tray or spray unit as required. Then reseal container immediately. GP101 has a pot life of approximately two hours when exposed to the elements, can vary depending on the ambient conditions.
Components: | One Part |
Type: | Solvent Based |
Finish: | Matt or Gloss |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | 500.0g per Litre |
Volume Solids: | 53.7% |
Suitable Substrates: | For a wide range of clean prepared rough or smooth surfaces |
Application Method: | Brush, Roller or Spray |
Theoretical Coverage: | 8 - 10 m2 per litre at microns |
Wet Film Thickness (WFT): | 100 microns |
Dry Film Thickness (DFT): | 55 microns |
Induction Time: | - |
Pot Life: | 20 hours at 20°C |
Touch Dry: | 1 - 2 hours at 20°C |
Overcoatable: | |
Fully Cured: | |
Cleaner / Thinner: | Thinners 14 |
Shelf Life: | |
Packaging: | Available in 2.5 and 5 Litres |