RustoleumEpoxyShield Garage Floor Coating is a 2 pack water based epoxy multi coloured fleck garage floor paint offering excellent resistance to heavy foot traffic, vehicles, chemicals, and standing water. The kit consists also contains a cleaning solution, decoration chips, paint paddle and a instruction DVD.
EpoxyShield Garage Floor Coating offers a multi coloured fleck finish that user friendly and easy to apply water based epoxy garage floor coating with ultimate adhesion and durability. The product has an excellent wear, impact and abrasion resistance like heavy foot and vehicle traffic. EpoxyShield resists chemicals and standing water. The kit consists of a two part epoxy coating, a cleaning solution, decoration chips, paint paddle and an instruction DVD.
Rustoleum EpoxyShield Garage Floor Paint is best used as a garage floor coating but can also be used outside on floors like car parks. Ideally this product will be used on all types of concrete floors, which are completely clean and dry. It is not recommended to apply on smooth or dense concrete or concrete that contains a curing compound, which would potentially prevent a good adhesion. EpoxyShield can also be applied on any old good adhering coatings.
Firstly the surface will need to be prepared appropriately, make sure any oil or grease has been removed. This can be done using a scrub brush and a good quality cleaner/degreaser such as Rustoleum ND14 or use a solvent cleaner. Scrub the floor thoroughly and wipe up the excess cleaner with rags or paper towels to prevent contaminants from spreading. Rinse thoroughly with fresh water and make sure the floor is puddle free using a broom or squeegee.
By using the instructions mix the product with a mechanical paddle mixer and apply appropriately using a paint roller. While the paint is still wet, scatter the flakes as required. Once the paint is dried, likely sand to denib the flakes. We recommend a clear overcoat to seal the flakes such as Rustoleum 4900 Polycoat 2K.
Rustoleum EpoxyShield Garage Floor Coating can be used on concrete floors which are completely dry and clean, but is highly recommended for use in garages. We would not recommend use in garages which are prone to flooding as this will affect the performance of the product.
Contact us about Garage Floor Paint
If you have any questions about our EpoxyShield Garage Floor Coating Kit or any other of our garage floor painting products, simply call our team on; 01462 421 333. We are well experienced in floor paints and coatings and will be able to help, no matter what your request or query.
- A high performance, two component, water based, epoxy floor coating.
- EpoxyShield Garage Floor Coating is for indoor and outdoor use e.g. garages and car parks.
- One coat is all that is needed, no primer, resists petrol, antifreeze etc.
- EpoxyShield is a fast drying floor coating.
- The Rust Oleum EpoxyShield kit contains: 3.55 litre 2-part floor paint, concentrated cleaner, decorative chips, stirring stick, detailed instructions.
- A Free Instruction DVD is included in the kit
|VOC Content:||53.0g per Litre|
|Suitable Substrates:||For concrete floors, which are completely clean and dry|
|Theoretical Coverage:||Each Epoxyshield kit contains enough product to cover approximately 25 m2 of smooth, bare concrete (a normal 1 car concrete garage floor). Very rough or porous concrete may require more material. Expect coverage of 12-20 m2 on those surfaces|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Induction Time:||15 minutes at 20°C|
|Pot Life:||1.5 hours at 20°C|
|Overcoatable:||After 48 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Wash all tools and equipment immediately with warm water and mild detergent|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35° C|
|Packaging:||Available in 3.55 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.