Rust-Oleum Noxyde PLUS

Non Hazardous
A water-based coating that provides superior adhesion and corrosion protection for metal cladding.
Available in 20 Kg
From £273.52 £227.93
In stock
Only %1 left
Product Description

Rust-Oleum Noxyde PLUS is a single pack, water-based elastomeric coating based on a silane modified acrylic binder. Provides superior adhesion and corrosion protection for metal cladding.

Best Uses

Rust-Oleum Noxyde PLUS is a rust preventive and waterproofing coating for metal cladding for exterior and interior use. This metal cladding paint is formulated for use on iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc.

Rust-Oleum Noxyde PLUS is also suitable as an adhesion primer when diluted with 25% water for slightly or non porous substrates such as glass, smooth bricks and concrete, ceramics, tiles, etc.

  • All in one primer and topcoat
  • Paint dry fall therefore saving preparation & clean up time
  • Suitable for exterior and interior use
  • Provides excellent adhesion
  • High dirt pick up resistance
  • 200% elastic - Does not crack or peel

The product contains anti-corrosion pigments and is lead, chromate and zinc free.


Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents. The substrate has to be dust free and made rust free by means of sandblasting (Sa2), manual cleaning (St2) or high pressure water jetting (min. 600 Bars). After jetting, the substrate has to be dust free.

On new galvanised surfaces, new zinc, aluminium, stainless steel, apply first a coat of Rust-Oleum Pegalink or Rust-Oleum PVDF Primer. On ferrous substrates, apply Rust-Oleum Noxyde Plus in red or grey as the first coat. In all instances apply contrasting Noxyde Plus colours for subsequent layers.

To ensure homogeneity, coating materials should be thoroughly stirred mechanically prior to use. Apply via brush, roller or airless spray.

When used for interior works, provide for adequate ventilation. During work stoppage, fully immerse brush or nozzle in water. Product is recoatable after 24 hours with itself. Do not apply outside if rain is expected within 24 hours. Maximum wet film thickness: 600μm.

Compatible  topcoats are Rust-Oleum Coating PRT, Rust-Oleum Alkythane 7500, Rust-Oleum Metal Cladding Topcoat, Rust-Oleum Paracem range, Rust-Oleum Pegacryl Satin.

Technical Details
Components: Single Pack
Type: Water Based Silane Modified Acrylic
Finish: Satin
Stock Colours: 10 English Red, 20 Grey Green, 40 White, RAL 7001, RAL 7016, RAL 7032, RAL 7035, RAL 9002, RAL 9004, RAL 9010, A66 Brown, 10-A-05 Goosewing Grey
Tintable: No
VOC Content: 45 g/L
Volume Solids: 46%
Suitable Substrates: Iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc.
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage:
  • Brush/Roller - 240 - 360 g per m2 per coat
  • Airless - 360 - 600 g per m2 per coat
  • Total consumption for optimal rust preventive protection 950 g/m² (in minimum 2 coats) = 350 μm dry film thickness
Wet Film Thickness (WFT): 380 microns
Dry Film Thickness (DFT): 3175 microns
Induction Time: -
Pot Life: -
Touch Dry: 1 hour 20 minutes at 20°C
Overcoatable: After 24 hours minimum at 20°C
Fully Cured: 14 days at 20°C
Cleaner / Thinner: Water
Shelf Life: Minimum of 4 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C.
Packaging: Available in 20 Kg

Related Products