Rust-Oleum Pegalink Universal Adhesion Primer
Rustoleum Mathys Pegalink Universal Adhesion Primer is suitable for on wood, cement, concrete, bricks and especially metal substrates such as, copper, zinc, galvanised steel and iron.
Rustoleum Mathys Pegalink Universal Adhesion Primer is a single component universal adhesion primer, available in white, that works well on a multiple of different surfaces to ready it for a decorative coating.
Best Uses
Rustoleum Mathys Pegalink Universal Adhesion Primer offers excellent adhesion on a lot of surfaces: wood, gypsum, cement, bricks and especially on smooth and
difficult to adhere to surfaces like: galvanized steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc. Can be used in- and outdoors.
- Excellent adhesion on a lot of surfaces
- Flexible
- Excellent flow
- UV-resistant
Application
In general, it is not necessary to mat smooth surfaces by sanding; in most cases cleaning and/or degreasing of the surface is sufficient in order to obtain good adhesion.
- APPLICATION & THINNING: BRUSH - All types can be used. Do not dilute.
- APPLICATION & THINNING: ROLLER - Not recommended, except with a lacquer roller. Do not dilute
- APPLICATION & THINNING: AIRLESS SPRAY - Nozzle: 11 / Pressure: 200 bars. Do not dilute.
- APPLICATION & THINNING: AIR-ATOMISED SPRAY - Possible, do not dilute.
Surface and Environment
Rustoleum Mathys Pegalink Universal Adhesion Primer can be used on all common smooth surfaces where often paints will struggle to adhere to them. Use Rustoleum Mathys Pegalink Universal Adhesion Primer on wood, cement, concrete, bricks and especially metal substrates such as, copper, zinc, galvanised steel and iron.
| Components: | One Part |
| Type: | Universal adhesion primer based on water dispersed acrylic resins |
| Finish: | Satin |
| Stock Colours: | 1 White |
| Tintable: | Yes, in 2.5L only. Please note, bespoke tints are non refundable / exchangable |
| VOC Content: | 45.0g per Litre |
| Volume Solids: | 37% |
| Suitable Substrates: | For wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanized steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc. Can be used internally and externally |
| Application Method: | Brush, Lacquer Roller, or Airless Spray |
| Theoretical Coverage: | 10.5 m2 per litre at 50 microns |
| Wet Film Thickness (WFT): | 100 microns |
| Dry Film Thickness (DFT): | 36 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 20 minutes at 20°C |
| Overcoatable: |
24 hours at 20°C with waterborne paints. Decorative alkyd lacquers should be checked first by means of an adhesion test. |
| Fully Cured: | 2 days at 20°C |
| Cleaner / Thinner: | Water |
| Shelf Life: | 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. |
| Packaging: | Available in 1 and 2.5 Litres |
