Rustoleum 5401 Impregnation Primer

SKU
id3507
UN3082 (Class: 9, Pk Grp: III)
Rustoleum-Mathys Impregnation Primer 5401 is a solvent free, two component epoxy primer for concrete floors.
Available in 1 and 5 Litres
From £31.33 £26.11
In stock
Only %1 left
Product Description

Rustoleum Impregnation Primer 5401 is a solvent free, two component, epoxy primer, designed for application to concrete and masonry surfaces.

Rustoleum Impregnation Primer 5401 is part of our fantastic range of primers, thinners and cleaners, and can be used on all concrete based and masonry walls/floors.

Best Uses

Rustoleum Impregnation Primer 5401 is strongly recommended for use on porous, mineral materials to offer excellent adhesive qualities before the overcoating of other Rustoleum Products, including, Compound System 5400, Solvent-free High-Build Epoxy System 5500, High-Performance Epoxy System 9100 Topcoats and can also be used as a tack-coat for Rustoleum Concrete Repair Mortar 5403 and Epoxy Floor Mortar 5800.

Application

Rustoleum Impregnation Primer 5401 can be applied using brush or roller for a theoretical coverage rate of 9-10m2 per litre and is available in 5 litre containers for an overall coverage rate of up to 50m2 depending on the porosity of the surface.

Surface and Environment

Rustoleum Impregnation Primer 5401 can be used on all concrete and masonry surfaces that need an adhesive primer for protection and the preparation of an overcoating product. Rustoleum Impregnation Primer 5401 is a top of the range primer that has been specially designed for floor use in light industrial exposures and/or domestic use.

Technical Details

Notes

Technical Info

Components: Two Part
Type: Solvent-free epoxy impregnation primer
Finish: Gloss
Stock Colours: Clear
Tintable: No
VOC Content: 0.0g per Litre
Volume Solids: 100%
Suitable Substrates: For concrete and other porous, mineral surfaces
Application Method: Brush, Roller
Theoretical Coverage: 10 m2 per litre
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 100 microns
Induction Time: 10 minutes at 20°C
Pot Life: 30 minutes at 20°C
Touch Dry: 2 hours at 20°C
Overcoatable: After 36 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Rustoleum Thinner 160
Shelf Life: 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 1 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use