£7.75 delivery on orders excluding certain products & postcodes *
Remmers Primer Hydro SF is best used as a primer for sanding, mineral substrates such as P II and P III, and for weathered old coatings that are capable of supporting a load.
Always ensure that the substrate is clean, dry and free of dust and any cracks. The surface should also be clear of salts that are known to be damaging to building materials.
Apply via Brush, Roller or Spray.
Any buildings or materials that are not intended to come into contact with the product should be protected using suitable measures. Ensure that any structural defects such as cracks, cracked joints, defective connections and rising damp are remedied prior to application. Do not let excess material build up on the surface.
Remmers Primer Hydro SF can be diluted with water depending on the absorbency of the substrate.
Not suitable for use on glossy layers, which should be avoided.
Components: | Single Pack |
Type: | Aqueous |
Finish: | n/a |
Stock Colours: | Milky White Appearance |
Tintable: | No |
VOC Content: | < 1 g/l |
Volume Solids: | 15% |
Suitable Substrates: | Mineral |
Application Method: | Brush, Roller, Airless Spray or Conventional Spray |
Theoretical Coverage: | 0.1 - 0.2 l/m² depending on the substrate |
Overcoatable: | 12 hours at 20°C |
Fully Cured: | - |
Cleaner / Thinner: |
Clean tools immediately after use with water. |
Shelf Life: | 12 months from date of production unopened |
Packaging: | Available in 5 Litres |