Please note, we can only deliver this product to the card holders address if you order online. If you would like us to deliver to an alternative address, please contact our sales team.
Slip Stream Pro 20 X is an upgrade to the Pro 20 with a powerful pump that can shift 18 litres of water per minute. Powered by a Honda engine.
Following on from our hugely successful Slip Stream Pro 20 we are proud to introduce the Pro 20 X. This extremely powerful system carries all the features of the Pro 20 but with the addition of an upgraded pump that shifts 18 litres of water per minute. This enables the Pro 20 X to power a large 22” triple headed stainless steel surface cleaner.
- 2:1 Gearbox
- Italian Interpump
- Easy Bleed Valve
- Low oil shut down
- Return to tank bypass
- Adjustable pressure regulator
- Robust long life pump with ceramic pistons
Cleaning Coverage In A Typical Working Day
- ;Block Paving: 360 square metres
- Paving Slabs: 420 square metres
- Concrete: 480 square metres
- Pro 20 X Pressure Washer
- 22” (560mm) Surface Cleaner
- Variable fan lance
- 10 metres of power hose
- 3 metres of suction/return hose
Pro 20 X:
- Engine: 13 HP Honda GX 390
- Litres per Minute: 18
- PSI: 2900
- Bar: 210
- Weight: 65kg
- Gearbox: 2:1 Reduction
- Fuel Type: Unleaded Petrol
- L x W x H (cm): 78 x 63 x 81
22" Flat Surface Cleaner:
- Cleaning Width: 22 Inches
- Max Operating Pressure: 276 bar
- Max Delivery Rate: 30 lpm
- Max Water Inlet Temperature: 82°C
- Weight: 18 Kg
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.