Teamac G121 industrial floor paint can be used on a variety of surfaces, including concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.
Teamac G121 Industrial floor paint is a general purpose foot and light truck traffic paint for interior and exterior use. Teamac Floor Paint is ideal for use in garages, warehouses, showrooms, corridors, indoor car parks and workshops, offering a degree of resistance to oils and chemicals. If the area of application is prone to getting wet, Promain offers you Coo-Var Suregrip anti slip floor paint which can be applied as a top coat to increase slip resistance.
Teamac Floor Paint is best used in garages, warehouses, showrooms, corridors, indoor car parks and workshops. Over a long period of time floors become damaged and paints become faded, due to the constant use of humans, machinery and vehicles. It is important to provide your industrial flooring with a paint that you know will give you long lasting protection, and an eye pleasing result. Teamac Industrial Floor Paint offers you outstanding results, and a semi-gloss finish.
Teamac Industrial Floor Paint should be applied by using brush, roller or spray. Apply using roller, for a smooth finish and use a brush in areas which require more precision. Make sure the surface is clean and dry without loose debris lying about to ensure the result you desire.
Teamac G121 Industrial Floor Paint is designed for use on a whole host of different environments with heavy duty industrial floors. G121 can be used on a variety of different surfaces, including concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.
- Teamac G121 Industrial floor paint is a general purpose foot and light truck traffic paint for interior and exterior use
- Teamac Floor Paint is ideal for use in garages, warehouses, showrooms, corridors, indoor car parks and workshops etc
- If prone to getting wet outside, use SUREGRIP on top to increase slip resistance
- Teamac Industrial Floor Paint offers some resistance to oils and chemicals
|Stock Colours:||White, Black, Tile Red, Light Grey, Flint Grey, Blue, Forest Green, Yellow|
|Tintable:||RAL and BS4800 colours also available to order please call. Please note, tinted colours are unrefundable or exchangable|
|VOC Content:||391.0g per Litre|
|Volume Solids:||51 - 60%|
|Suitable Substrates:||For masonry, wood, cement, concrete and many other surfaces|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||13 - 15 m2 per litre at 40 microns|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||40 - 45 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 14|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.