Coo-Var Q228 Oil Tolerant Primer is ideal for use on garage and industrial floors that have some form of oil contamination. Coo-Var Q228 Oil Tolerant Primer covers the stain and works to protect the surface against further staining.
Coo-Var Q228 Oil Tolerant Primer can be applied by brush, roller or trowel edge and can be applied on substrates with hygrometer readings up to 85% RH. Coo-Var Q228 Oil Tolerant Primer is available in 4kg units and has a theoretical coverage rate of 4m2 per kg.
Coo-Var Q228 Oil Tolerant Primer can be used on concrete floors and fine concrete screeds with a thickness of 50mm or more. Coo-Var Q228 Oil Tolerant Primer works to improve the adhesion of over coatings to substrates that have been thoroughly cleaned but may still have some form of contamination.
|VOC Content:||Max 10 g/l|
|Suitable Substrates:||Ideal for concrete floors and screeds with residual oil contamination|
|Application Method:||Roller (short to medium pile)|
|Theoretical Coverage:||16 m2 / 4 kilo pack at recommended dry thickness|
|Wet Film Thickness (WFT):||220 microns|
|Dry Film Thickness (DFT):||220 microns|
|Touch Dry:||24 hours at 20°C|
|Overcoatable:||After minimum 24 hours at 20°C|
|Cleaner / Thinner:||Thinner: n/a, Cleaner: Thinners 16 (Brushwash only)|
|Packaging:||Available in 4 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.