Coo-Var Q124 Dampshield, 5 Kg

SKU
id3623
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN2735 (Class: 8, Pk Grp: III)
A clear gas permeable damp proof membrane, suitable for screeds, coatings and other floor coverings such as carpet, vinyl and wood.
Available in 5 Kg
£138.82 £115.68
In stock
Product Description

Coo-Var Q124 Dampshield can be used as a primer on masonry swimming pools as well as being a floor sealant for floor coverings such as carpet, vinyl and wood.

Coo-Var Q124 Dampshield is a 2 pack floor sealer, formulated with a damp proof membrane (DPM) that is suitable for screeds, coatings and other floor coverings such as carpet, vinyl and wood and also works as a suitable primer for use on masonry swimming pools.

Best Uses

Coo-Var Q124 Dampshield is a gas permeable damp proof membrane that can be used for earlier access than would otherwise be available for screeds, coatings and other floor coverings such as carpet, vinyl and wood.

Application

Coo-Var Q124 Dampshield can be applied using a roller to produce a clear gloss finish on floors, with a drying time of 24 hours. Coo-Var Q124 Dampshield can be over coated after 12-24 hours for a more protective surface, with a theoretical coverage rate of 20m2 per unit. Damp shield is available in 5kg containers.

Surface and Environment

Coo-Var Q124 Dampshield can be used as a primer on masonry swimming pools as well as being a floor sealant for floor coverings such as carpet, vinyl and wood.

Technical Details
Components: Two Part
Type: Resin Membrane
Finish: Gloss
Stock Colours: Clear
Tintable: No
VOC Content: 10.0g per Litre
Volume Solids: 100%
Suitable Substrates: For concrete floors and fine concrete screeds
Application Method: Lambswool Roller
Theoretical Coverage: 20 m2 per 5 Kg pack
Wet Film Thickness (WFT): 230 microns
Dry Film Thickness (DFT): 230 microns
Induction Time: -
Pot Life: 30 minutes at 20°C
Touch Dry: -
Overcoatable: After 12 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Teamac Thinners 16
Shelf Life: 2 years unopened in original container
Packaging: Available in 5 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use