Coo-Var Profloor is an exceptionally hard wearing water based 2 pack epoxy floor and wall coating.
Coo-Var Profloor is an exceptionally hard wearing water based 2 pack epoxy floor and wall coating. Dries to an off-gloss finish. Seven colours available plus other colours to order. Aggregate is mixed with paint or sandwiched between two coats for an anti slip version. Profloor can be used internally or externally, as well as the option to use on walls too.
Coo-Var Profloor 2 pack epoxy should be diluted with 500 ml of clean water per 5kg pack. Profloor is ideal for use in heavy traffic areas for foot traffic, trucks, vans and forklifts, inside and outside. Profloor can be used over stable existing paint coverings. Can be used on wood, concrete, masonry, asphalt and tarmac. Can be used on floors and walls. An anti slip option is available. Do not apply at temperatures below 10°C.
All surfaces should be clean, dry and free from contaminants. Like many of the products we offer you at Promain, Profloor should be applied using brush or roller. Do not apply Profloor if the room temperature is likely to drop below 10°C during application or during the drying process. In confined spaces provide adequate ventilation during application and drying.
Profloor is ideal for use in heavy traffic areas for foot traffic, trucks, vans and forklifts, inside and outside. Profloor can be used over stable existing paint coverings. Coo-Var W222 Profloor can be used on wood, concrete, masonry, asphalt and tarmac. This floor paint can be used on walls as well as floors.
- Profloor is exceptionally hard wearing
- For use in heavy traffic areas with fork trucks and vans
- Ideal inside or outside
- Can be used on wall and floors, and as an anti-slip floor paint
- Please allow around 3 - 5 days for delivery
|Stock Colours:||Tile Red, Grey, Green, Safety Yellow, Safety Red, Black and White|
|Tintable:||Yes, on request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||10.0g per Litre|
|Volume Solids:||55 - 85% depending on colour|
|Suitable Substrates:||Can be used on wood, concrete, masonry, asphalt and tarmac. Can be used on floors and walls.|
|Application Method:||Brush or Shortpile Roller|
|Theoretical Coverage:||6 - 10 m2 per Kg|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||35 - 70 microns|
|Pot Life:||2 - 4 hours at 20°C|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||Minimum 16 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years unopened in original container|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.