Coo-Var W221 High Performance Primer is a two pack high performance primer, designed to assist the adhesion of Profloor floor paint and other Coo Var products to non porous floors.
Coo-Var W221 High Performance Primer is a water based product that when dry produces a semi-gloss finish.
Coo-Var W221 High Performance Primer is designed for use on walls and floors and is part of the fantastic range of Coo-Var Paint products found in the Coo-Var Miscellaneous range. Coo-Var W221 High Performance Primer can be used where mechanical abrasion is not practical and where chemical etching has to be used. Coo-Var W221 High Performance Primer is an ideal barrier that can be used between old flooring's and selected Coo-Var products.
Coo-Var W221 High Performance Primer should be diluted with 10% water prior to application and applied using a brush or roller, directly to the surface. Coo-Var W221 High Performance Primer is touch dry after 2-3 hours.
- Coo-Var W221 Two Pack High Performance Primer
- To assist the adhesion of Profloor floor paint and other Coo-Var products to non-porous floors
- Can be used on walls as well as floors, low odour
|Stock Colours:||Opaque when wet, dries clear|
|VOC Content:||10.0g per Litre|
|Suitable Substrates:||For flooring|
|Application Method:||Brush, Short Pile Roller|
|Theoretical Coverage:||35 - 50 m2 per 5 Kg pack at 45 microns|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||45 microns|
|Touch Dry:||2 - 3 hours at 20°C|
|Overcoatable:||After 1.5 - 2 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.