Teknos Anti-Stain Aqua 5210 Knot Primer

SKU
id19903
Non Hazardous
A water borne industrial knot spot primer for new exterior wood such as windows and doors.
Available in 1 Litre in White
£11.04 £9.20
In stock
Product Description

Teknos Anti-Stain Aqua 5210 is a water borne industrial knot spot primer for new exterior wood such as windows and doors.

Best Uses

Teknos Anti-Stain Aqua 5210 effectively reduces yellowing from knots and helps reduce staining from woods with high resinous content such as Western Redwood, Cedar, etc. Teknos Anti-Stain Aqua 5210 is suitable as a knot spot primer.

Application

The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13 % and should not exceed 15 %.
All softwood for exterior use should either be vacuum impregnated or treated with a wood preservative.

Apply via airmix (aircoat) or airless by hand or in automatic spraying equipment. The product is delivered ready for use. Stir the product well before use.

Primed parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.

Technical Details
Components: One Part
Type: Water-borne
Finish:
Stock Colours: White
Tintable: No
VOC Content: 3.0g per Litre
Volume Solids:
Suitable Substrates: For new wood designated for exterior use
Application Method: Airmix (aircoat) or airless by hand or in automatic spraying equipment.
Theoretical Coverage: 5 - 8 m2 per litre
Wet Film Thickness (WFT): 125 - 200 microns
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Dry To Handle: 2 - 3 hours at 20°C
Overcoatable: Dry to sand / recoat: 3-4 hours at 20°C
Fully Cured:
Cleaner / Thinner: Clean up with water
Shelf Life:
Packaging: Available in 1 Litre

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.