Teknos Teknoseal 4009 is an aqueous and flexible product for the protection of wooden V-joints and corner joints.
Teknos Teknoseal 4009-00 is a professional product formulated to protect wooden V joints and corner joints internally and externally. Ideal for production of wooden windows and doors prior to a protective topcoat treatment.
Teknos Teknoseal 4009-00 is not intended as a filler as it has no structural strength and should not be used to bridge gaps. This product is colourless and comes in a 320ml cartridge.
The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. All softwood and non-durable hardwood for exterior use should either be vacuum impregnated (only softwood) or treated with a wood preservative.
Pre-treatment/primer must be thoroughly dry before the product is applied. Is applied by caulk gun in a thin layer. Smooth with damp/moist, but not wet sponge. Possible surplus is removed.
The product is delivered ready for use. Contraction of volume approx. 25 %. Primed parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.
|Suitable Substrates:||For wooden internal and external V joints and corner joints|
|Application Method:||Supplied in cartridge|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Dry to Handle:||
1mm Thickness: 2 hours at 23°C
1.5mm Thickness: 4 hours at 23°C
|Cleaner / Thinner:||Clean up with water|
|Shelf Life:||The product must be stored at temperatures above 5 °C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.|
|Packaging:||Available in 320ml Cartidges|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.