Jotun Thinner No. 2

SKU
id17018
UN1300 (Class: 3, Pk Grp: III)
A general purpose thinner for most conventional Jotun alkyd or oil based paints.
Available in 5 and 20 Litres
From £32.26 £26.88
In stock
Only %1 left
Product Description

Jotun Thinners No.2 is designed to improve the flow of a range of Jotun alkyd and oil based products and also be used as cleaner for pumps and tools before and after painting.

Best Uses

Jotun Thinners No.2 is a general purpose solvent based thinner offering low boiling point hydrogen treated naphtha. Jotun Thinners No.2 is suitable for use with Ballastic Black, Jotun Pilot II, Ravilakk and Spontan Varnish. Specially suitable as thinner for alkyd and oil based products. Recommended usage as per the specific data sheet or application guide of the product one wish to apply.

Storage

The product must be stored below 25°C and in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.

Technical Details
Components: One Part
Type: Thinner
Finish: -
Stock Colours: Clear
Tintable: No
VOC Content: 780.0g per litre
Volume Solids: 0%
Shelf Life: 48 months
Packaging: Available in 5 and 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use