*Jotun Ultra Topcoat

SKU
id17027
***
This product is now discontinued.
Out of stock
Product Description

Please note, this product is now discontinued. Contact our technical team for a suitable alternative.

Jotun Ultra Topcoat is a quick drying, alkyd topcoat containing aromatic solvents that offers good gloss retention and flexibility that lasts for many years in atmospheric environments.

Best Uses

Jotun Ultra Topcoat has been developed as a quick drying alkyd topcoat that contains aromatic solvents. A key benefit, provided by Jotun Ultra Topcoat, is that it offers good gloss retention that lasts for many years. Designed to be applied as a topcoat to steel not only in the marine industry for superstructures of boats and other marine crafts but for general application to metal used in the construction industry.

Jotun Ultra Topcoat is recommended for use on surfaces such as engines, topsides or decks and superstructures within marine environments. It can also be utilised as a protective coating for a wide range of industrial structures and substrates in industrial environments.

Application

Application is recommended by airless or conventional spray but for small areas such as strip coating a brush or roller can be used. A small amount around 5% Jotun Thinner No 7 can be added, but care must be taken to achieve the specified dry film thickness. Jotun Ultra Topcoat can be re-coated with products containing xylene or stronger solvents. Ultra Topcoat is both a physically drying and oxidative paint, which means that as well as the process of the solvent evaporating into the atmosphere, it will also react with oxygen. For these reason Jotun Ultra Topcoat should be over coated either within 30 hours or after 7 days.

Surface and Environment

Jotun Ultra Topcoat is for use on metal substrates within marine and industrial environments. It is particularly recommended as a topcoat in environments susceptible to atmospheric corrosion.

Technical Details

Approvals

  • Low flame spread certificate according to BS 476 Part 6

Technical Info

Components: One Part
Type: Oxidatively drying alkyd coating.
Finish: Gloss
Stock Colours: White and Black
Tintable: Yes. Please note, bespoke tints are non refundable / exchangable.
VOC Content: 477.0g per litre
Volume Solids: 46%
Suitable Substrates: Compatible coated surfaces
Application Method: Airless Spray, Air Spray, Brush or Roller
Theoretical Coverage: 15 - 11.3m2 per litre
Wet Film Thickness (WFT): 65 - 90 microns
Dry Film Thickness (DFT): 30 - 40 microns
Induction Time: -
Pot Life: -
Touch Dry: 30 mins at 10°C
Overcoatable: 4 hours at 10°C
Fully Cured: 7 days at 10°C
Cleaner / Thinner: Jotun Thinner No. 7
Shelf Life: 48 months
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use