This product is now discontinued. Please call our technical team for an alternative.
This FireKill Intumescent Varnish system contains a fire protective base and topcoat for the enhancement or internal wood surfaces.
This FireKill Varnish (Base and Topcoat) two pack lacquer product produces a decorative, fire protective finish for timber and timber derivative surfaces. It is designed for internal use and will achieve Class 1 Spread of Flame Class 0 Fire Propagation when both top and base coats are applied. FireKill Varnish provides good adhesive properties and can be applied to surfaces which have been previously coated with a standard clear varnish.
The FireKill Varnish two pack comes as a complete package which is designed to provide users with a full fire protective system for surfaces which have previously been coated with varnish. FireKill Varnish can be used to help maintain the surface's natural beauty, delivering a clear coating, available in a satin, gloss or matt finish.
FireKill Varnish can be applied with a brush, roller or airless spray and has a theoretical coverage rate of either 20 square metres (20m pack) or 40 square metres (40m pack). After applying the first coating, you must allow 12 hours before applying a second coat.
Surface and Environment
FireKill Varnish can be used on all internal wooden floors, either bare or previously varnished. FireKill Varnish is ideal for use on interior environments where there is high wood coverage, in order to protect against fire hazards.
- Supplied as a complete package of a basecoat and topcoat
- Rated to BS476 Part 7: Class 1 surface spread of flame and BS476 Part 6: Fire propagation
- Suitable for use on bare or previously varnished surfaces
- Solvent based
- Exceptionally clear finish enhances the natural beauty of wood
- For internal use only
- Available in Gloss, Satin or Matt finishes
- FireKill Varnish Topcoat must be applied over the base coat
- Apply by brush, roller or airless spray
- Recoat after 12 hours
- Full cure after 12 hours
- Available in 20 sq. metres and 40 sq. metre packs
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.