
Bedec Superflex Elastomeric Coating for Roofs and Walls
Bedec Superflex Elastomeric Coating for Roofs and Walls, a thick flexible coating that prevents leaking roofs, gutters, corrugated sheets, asbestos, copper, roof tiles and walls.
Best Uses
Bedec Superflex Elastomeric Coating is primarily designed for roof tiles but can be used to aid the protection of walls too. Superflex is an easy to apply product that provides surfaces with a seamless, high build film that works excellently to resist water damage.
- Bedec Superflex is water based
- Suitable for use on almost any surface including roofing tiles, brick, corrugated iron, asbestos, copper, etc.
- Easy to apply
- Ultraviolet protection
- High build
- Seamless
- Waterproof
- Quick drying.
Application
Bedec Superflex Elastomeric Coating for Roofs and Walls can be applied using brush, roller or airless spray and has a theoretical coverage rate of 2m2 per litre and can be purchased in 2.5, 5 and 20 litre tubs for larger jobs. Bedec Superflex Elastomeric has a drying time of approx 4 hours at 20°C. This will increase at lower temperatures. Please consult manufacturer's product data sheet prior to use. Not suitable for applying to surfaces that have no run-off, or where water will pool.
Surface and Environment
Bedec Superflex Elastomeric Coating for Roofs and Walls can turn an old, dingy looking roof into a brand-new looking roof with the application of tile red roof tile paint. Not only can Superflex be used on Roof Tiles but is available in other colours too for use on brick, corrugate iron, asbestos and copper, to name but a few.
External Paints & Products from Promain
We have a wide range of external paints, sealers and products available here at Promain from masonry paint to multi surface paint, so no matter what you're looking for we can help. If you can't find the product you're looking for, or have some questions about a product, give our team of experts a call, they're more than happy to help.
Notes
- First coat can be thinned with water up to 30%
Technical Info
Components: | One Part |
Type: | Water-based Acrylic |
Finish: | Soft Sheen |
Stock Colours: | Battleship Grey, Black, Dark Green, Light Grey, Solar Silver, Solar White, Tile Red |
Tintable: | Upon Special Request, Depending on Quantity. Please note, bespoke tints are non-refundable / exchangeable. |
VOC Content: | 140.0g per Litre |
Volume Solids: | 58% |
Suitable Substrates: | Almost any surface including roofing tiles, slate, brick, concrete, corrugated iron, corrugated galvanising, asbestos, asphalt, felt, copper, zinc, lead, PVC or polycarbonate roof sheets, plus most plastics and timber |
Application Method: | Brush, Roller, Conventional H.V.L.P or Airless Spray |
Theoretical Coverage: | 2 m2 per litre per coat for roofs, 10m2 per litre per coat on walls |
Wet Film Thickness (WFT): | 500 microns for roofs, 100 microns for walls |
Dry Film Thickness (DFT): | 225 microns for roofs, 45 microns for walls |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 4 - 6 hours at 18°C |
Overcoatable: | 24 hours at 18°C |
Fully Cured: | |
Cleaner / Thinner: | Clean up with warm soapy water |
Shelf Life: | 24 months |
Packaging: | Available in 2.5, 5 and 20 Litres |