Beko Allcon 10 Adhesive
Beko Allcon 10 Construction Adhesive is a single component, fast curing, frost proof adhesive, which is suitable for both internal and external use. This adhesive holds within 7-10 minutes!
Best Uses
Allcon 10 Adhesive is perfect for bonding timber, metals, aluminium, natural stone, fibre boards, MDF, ceramics, marble, insulation and much more. As Allcon 10 is frost proof, you can keep it in your van or shed overnight, and it will still be ready to use the next day. Suitable for both internal and external use, Allcon 10 is just one of the many painting accessories available from Promain.
Application
Application is with a standard caulking gun. No separate primer is required. Simply clean the surface, dampen (if required), apply Allcon 10 and clamp surfaces together if possible.
Allcon 10 bonds within 7-10 minutes and is fully cured within 40 minutes.
Suitable For Multiple Surfaces
Allcon 10 is suitable for a number of different surfaces, saving you money on having to buy separate adhesives. Below is a list of just some of the surfaces suitable for Allcon 10:
- Wood
- Brick
- Plastic
- Stone
- Porcelain
- MDF / Chip board
- Metal
- Marble
- Ceramics
- Plasterboard
- Foams
- Acrylic
- Insulation
IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu
Testing
- Test report in accordance with DIN EN 204 D4 (waterproof gluing), according to WATT 91 (+80°C)
Features and Benefits
- Bonds large variety of materials
- Single-component
- No primer required
- Frost-proof
- Suitable for use with natural stone
- Fully cures in just 7 to 10 minutes
- Holds 130Kgs per SQ CM
- An opened cartridge will last up to 18 months
- Suitable for both indoor and outdoor application
Technical Info
| Components: | Single Pack |
| Type: | Moisture-curing polyurethane |
| Finish: | n/a |
| Stock Colours: | Beige |
| Tintable: | No |
| Smell: | Low odour |
| Density: | Approx. 1.4 g/cm³ |
| Suitable Substrates: | Wood, Brick, Plastic, Stone, Porcelain, MDF, Metal, Marble, Ceramics, Acrylic and more |
| Application Method: | Standard caulking gun |
| Strength: | Up to 130kg per sq cm |
| Curing: |
Approx. 3 mm Allcon 10 per 24 hours Approx. 70% surface bonding after 7 to 10 minutes |
| Fully Cured: | 100% cured after 30 to 45 minutes |
| Shelf Life: | Opened cartridges can be used for up to 10 months, unopened cartridges last for up to 1½ years |
| Packaging: | Available in 150 and 310ml |
