PPG Nu-Klad IMP is a two-component, solvent-free, impregnating epoxy floor primer. Part of the PPG Nu-Klad floor coating system.
PPG Nu-Klad Imp has been developed to offer excellent penetration and saturation properties when applied to a concrete floor slab. Nu-Klad Imp is a two component solvent free, impregnating epoxy semi-transparent, gray floor primer.
- Primer for Nu-Klad floor coating systems
- Excellent impregnating properties (penetration and saturation of the concrete
PPG Nu-Klad IMP is applied by a roller and provides a semi-gloss finish. Nu-Klad Imp should be applied to floors that have been allowed to dry for at least 28 days in good ventilation conditions and the moisture content of the floor slab should not exceed 4.5%. The concrete must be sound, dry, free from laitance and any contamination, rough surface should be abraded by power tool or diamond abrading tool. The dry film thickness and spreading rate are depending on the absorption capability coming from the roughness and porosity of the concrete.
|Type:||Solvent Free Impregnating Epoxy|
|Stock Colours:||Semi transparent grey|
|VOC Content:||0.0g per Litre|
|Suitable Substrates:||For concrete floors|
|Application Method:||Brush, Roller, Trowel|
|Wet Film Thickness (WFT):||Depends on spreading rate and porosity of the substrate|
|Dry Film Thickness (DFT):||50 microns|
|Pot Life:||40 minutes at 20°C|
|Dry To Walk On:||16 hours at 20°C|
|Overcoatable:||Between 16 hours to 7 days at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Do not thin. Clean up with PPG Thinner 90-53|
|Shelf Life:||Base and Hardener 12 months when stored cool and dry|
|Packaging:||Available in 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.