£9.95 delivery on orders excluding certain products & postcodes *
Carboline Carboguard 890 GF is self-priming providing glass reinforcement to improve internal film strength, hardness, impact, and abrasion resistance. This coating is often used in severe service above or below the water line, in marine applications.
Apply via conventional spray, airless spray or brush for touch up or striping welds only. Prepare substrate as per data sheet requirements. Carboline Carboguard 890 GF may be coated with acrylics, epoxies or polyurethanes depending upon exposure and need. Contact our technical team for suitable systems depending on your requirements.
Suitable for heat up to:
Components: | Three Pack |
Type: | Cycloaliphatic Amine Epoxy with Glass Reinforcement |
Finish: | Flat |
Stock Colours: |
Call to check. Use only factory made colors for immersion applications. |
Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 192 g/L |
Volume Solids: | 77% |
Suitable Substrates: | Steel, Galvanised Steel, Concrete, CMU and previously painted surfaces |
Application Method: | Conventional Spray or Airless Spray, Brush for touch up or welds only |
Theoretical Coverage: | 30.3 m2 per litre at 25 microns 3.8 m2 per litre at 200 microns 1.5 m2 per litre at 500 microns |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 203 - 508 microns per coat |
Induction Time: | - |
Pot Life: | 3 hours at 24°C |
Overcoatable: | 8 hours at 16°C |
Fully Cured: | 2 days at 20°C |
Cleaner / Thinner: | Carboline Thinner No.2 |
Shelf Life: | Part A: 36 months at 24°C Part B: 15 months at 24°C Glass Flake Additive – 60 months at 24°C |
Packaging: | Available in 5 Litres |