Carboline Thermaline 4674

A 1 pack medium to high temperature coating that withstands continuous temperature up to 400ÂºC, and peaks up to 540Â°C.

Available in 5 Litres in Black.

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£80.00

Inc VAT £96.00

PRODUCT DETAILS

Carboline Thermaline 4674 is a single package medium to high temperature coating that withstands continuous temperature up to 400ºC peaks up to 540°C.

Please note, Aluminium colour is Made to Order and therefore has a considerable lead time. Call our Sales Team on 01462 421333 for further details.

Best Uses

Carboline Thermaline 4674 is resistant to thermal shock conditions from ambient temperature to 400°C. It can also be applied directly to properly prepared steel.

Application of Carboline Thermaline 4674 over inorganic zinc primers like Carboline Carbozinc 11 will provide superior performance by preventing rusting and rust streaking during a shutdown or when the equipment is exposed to moisture and/or salts at temperature less than 93°C.

Provides excellent weathering properties.

Application

Suitable for application via steel, aluminium or stainless steel. Apply via conventional or airless spray, or brush for touch up. Follow application guide via product data sheet.

TECHNICAL

Components:	Single Pack
Type:	Modified silicone
Finish:	Gloss
Stock Colours:	Black, Aluminium
Tintable:	No
VOC Content:	490 g/L
Volume Solids:	45%
Suitable Substrates:	Steel, Aluminium and Stainless Steel
Application Method:	Conventional Spray, Airless Spray or Brush
Theoretical Coverage:	11m2 per litre at 40 microns
Wet Film Thickness (WFT):	-
Dry Film Thickness (DFT):	Normally 40 microns. Two coats are recommended over bare steel and one or two coats over inorganic zincs such as Carboline Carbozinc 11. Excessive film thickness over inorganic zincs may result in blistering and delamination when temperature is increased.
Induction Time:	-
Pot Life:	-
Surface Dry:
Overcoatable:	After 5 hours at 20°C
Fully Cured:	8 hours at 20°C
Cleaner / Thinner:	Clean up with Carboline Thinner No2. Thin with Carboline Thinner No10 if required.
Shelf Life:	2 years in original unopened containers.
Packaging:	Available in 5 Litres for Black, 10 Litres for Aluminium