£9.95 delivery on orders excluding certain products & postcodes *
Centrecoat Block Paving Sealer is ideal for use on block paved drives and pathways, natural stone patio areas and cement based flagstones, as a sealer and joint stabiliser.
This product is not suitable for use on non porous or previously treated surfaces (unless sufficiently weathered to allow penetration).
All surfaces should be clean, dry and free from oil, grease, dust, laitance and any other deleterious materials. The surface should also be free from any mould or fungal growth. If oil stains are present, these can be removed with detergent and hot water.
If there is any mould and fungal growth present, this should be cleaned with Centrecoat GS36 Fungicidal Wash as directed.
Artificial Stone and Block Pavers
All artificial stone (cement based) and all block pavers must be left for three months minimum after placing before over coating with this product.
Application should ideally be by an airless sprayer designed for solvent based products, however application by brush or roller is also suitable.
Fungicidal Wash should be used every 6 to 12 months to control the surface of fungal and algal growth.
Components: | Single Pack |
Type: | Solvent Based |
Finish: | Mid Sheen |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | - |
Suitable Substrates: | Block paved drives and pathways, natural stone patio areas and cement based flagstones |
Application Method: | Airless Spray, Brush or Roller |
Theoretical Coverage: | 5 to 7 m2 per litre per coat. |
Pot Life: | - |
Surface Dry: | 1-2 hours at 20°C |
Overcoatable: | Overnight at 20°C |
Light Traffic Ready: | 24 hours at 20°C |
Cleaner / Thinner: | All equipment should be cleaned using xylene |
Shelf Life: | Up to 2 years from date of production unopened |
Packaging: | Available in 5 and 20 Litres |