£7.75 delivery on orders excluding certain products & postcodes *
Centrecoat Cold Galv Zinc Rich Primer is ideal for repairs to galvanised substrates and for the protection of steel substrates.
The recommended method of application is by either airless or conventional spray. Application by brush is also suitable.
Ensure the surface is fully cleaned and degreased prior to application. Rust burrs and any oily residues should be completely removed. Any sharp edges at welded seams will need to be ground down. Weld splatter, dust, scale, etc. should be removed.
The prepared surface should be clean, dry and free from lamination and dust.
Components: | Single Pack |
Type: | Zinc Rich Primer |
Finish: | Matt |
Stock Colours: | Zinc Grey 0250 or Bright Zinc Grey 2879 (note that silver is subject to commercially viable quantities) |
Tintable: | No |
VOC Content: | - |
Volume Solids: | Approx. 42% |
Suitable Substrates: | Steel, Galvanised Steel |
Application Method: | Brush, Airless Spray or Conventional Spray |
Theoretical Coverage: | 10.5 square metres per litre @ 40 microns DFT |
Wet Film Thickness (WFT): | 100 µm |
Dry Film Thickness (DFT): | 40 µm |
Induction Time: | - |
Touch Dry: | 15 minutes at 20°C |
Handle Dry: | 2 hours at 20°C |
Overcoating: | After 48 hours at 20°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | Centrecoat Quick Drying Thinner 003 |
Shelf Life: | 6 months from date of production unopened |
Packaging: | Available in 800ml and 2 Litres |