Centrecoat Emery Aggregate

SKU
id23853
Non Hazardous
A hard, angular aggregate mineral for use in Centrecoat slip resistant flooring and decking systems.
Available in 25 Kg in Various Sizes
From £38.10 £31.75
In stock
Only %1 left
Product Description

Centrecoat Emery Aggregate is a hard, angular mineral for use in Centrecoat slip resistant flooring and decking systems.

Best Uses

Centrecoat Emery Aggregate is ideal for use with the Centrecoat range of MMA products, Centrecoat floor paints and exterior flooring where a safe anti slip environment is required.

  • Tough and abrasion resistant
  • Very good chemical resistance
  • Angular profile

Available in a range of sizes, this anti skid material is ideal for broadcasting into suitable floor coating systems by hand or dispenser.

Application

Broadcast onto a suitable wet coating evenly. Allow to dry and brush loose sediment free. Alternatively, blind the surface completely then allow to dry and brush off excess. Afterwards a further coat can be applied as required.

Technical Details
  • Hardness: 8.5 - 9.5 Mohs
  • Coverage dependant on requirements
  • Storage: Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
  • Colour: Dark Grey
  • Available in 0.85 - 1.7mm, 0.5 - 1.0mm, 1 - 3mm and 3 - 5mm
  • Sold in 25 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use