£7.75 delivery on orders excluding certain products & postcodes *
Centrecoat R13 Rust Stain Remover is a non-acid rust remover converts rust compounds in to water soluble solution, that will change colour on activation, can be simply rinsed away with clean water. This non-acid rust remover is highly concentrated and efficient at removing rust and oxidisation from Marble, Stone, Wood, Paint, Fibreglass, or Concrete. Neutral pH, allows a wider range of uses.
This product is also suitable for the removal of graffiti from the above substrates.
Test first on the surface is essential to establish the correct dwell time. This will ensure the underlying substrate is not affected. Shake well prior to use. Apply neat product generously to a dry surface. Leave to react. For Light Staining leave for 10 minutes. For Heavy Staining leave up to 2 hours. Once applied do not let the product dry out, reapply if the surface becomes dry. Rinse clean with plenty of water, for best results use diluted with cold water
Components: | One Part |
Type: | Non acid rust remover |
Finish: | - |
Stock Colours: | Clear (Dark Purple when working) |
Tintable: | No |
VOC Content: | - |
Volume Solids: | - |
Suitable Substrates: | For Marble, Stone, Wood, Paint, Fibreglass, Concrete |
Application Method: | Brush, Roller |
Theoretical Coverage: | 3 m2 per litre |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | - |
Overcoatable: | - |
Fully Cured: | - |
Cleaner / Thinner: | Water |
Shelf Life: | Keep in a dry place (between 5°C and 30°C). 24 months following the production date when kept in the original unopened container |
Packaging: | Available in 1 Litre and 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.