Centrecoat Thermoplastic 1-20 Numbers and Shapes are an ideal educational tool for easy application to playgrounds.
Centrecoat Thermoplastic 1-20 Numbers and Shapes are a fun way for kids to play at school and they have been specifically designed to be applied in school playgrounds nationwide. Centrecoat Thermoplastic 1-20 Numbers and Shapes are part of Promains fantastic range of School Play Ground Graphics that are becoming more and more popular all the time.
Centrecoat Thermoplastic 1-20 Numbers and Shapes are applied using a blowtorch which is the best way to apply children's games to playgrounds. Centrecoat Thermoplastic 1-20 Numbers and Shapes produce an aesthetically pleasing finish that will allow kids to have fun before, during and after school.
Centrecoat Thermoplastic 1-20 Numbers and Shapes are easy to apply, simply lay the product on the area you wish to apply it to and use a blowtorch to seal the product to the surface, for a finish that can be walked over within minutes.
Surface and Environment
Centrecoat Thermoplastic 1-20 Numbers and Shapes are ideal for use on school play grounds in areas made out of tarmac and concrete and are flexible in hot or cold temperatures. Centrecoat Thermoplastic products offer excellent weather and abrasion resistance as they will be exposed to the elements for a long time and a high level of foot trafficking on a daily basis.
- Available in 3300mm x2600mm.
- Also available in Individual letters (Please Call).
- Ideal for use in school playgrounds.
- Easy to apply clean area and ensure the surface is dry and free of any surface grease or oil, position the required line length and apply heat (using a blow torch).
- Crisp and clean.
- Can be driven or walked over immediately.
- Flexible in hot or cold temperatures
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.