Coo-Var Tape Edge Glue is designed for use in conjunction with Coo-Var tapes and helps provide extra adhesion to stop edges from peeling back and extend the life of the tape.
Coo-Var Tape Edge Glue can be used in a number of environments to aid the adhesion of Coo-Var Tapes, including Photoluminescent Tape that Glows in the dark.
Coo-Var Tape Edge Glue is easy to apply, you only a tiny amount of Tape Edge glue, to bond the edges of the tape to the surface.
Surface and Environment
Coo-Var Tape Edge Glue can be used internally or externally on a number of different surfaces that are clean and dry. This is important for the glue to adhere to the surface properly
- Tape Edge Glue.
- Edge fix greatly helps to prevent the lifting of the Tape in high traffic areas.
- One simply applies the sealant down the side of the tape using the narrow nozzle built into the tube, it helps to secure the product and extend its life.
- A 150 ml tube will cover approximately 35 linear metres.
- Only a very small amount is required for bonding the edges of our grip tape
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.