£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
Advanced Search
My Cart

FeRFA Floor Category Coatings

FeRFA, the Resin Flooring Association, is a not-for-profit organisation representing the leading manufacturers, specialist contractors and associated companies involved in industrial and commercial resin flooring, screed and surface preparation. FeRFA do not represent the domestic/residential resin driveway industry.

Synthetic resin flooring is classified into eight specific types, each exhibiting its own particular performance characteristics. A variety of synthetic resins, typically epoxy, polyurethane and methacrylate, can be formulated to produce the different resin types.

Shop By
Filter by
  1. Price £0.00 - £99.99 Remove This Item
  2. Substrate Steel, Galvanized Remove This Item
Clear All
Filter by
Manufacturer
  1. PPG 1 item
Product Chemistry
  1. 2 Pack 1 item

1 Item

Set Descending Direction
  1. PPG SigmaCover 2 / Amerlock 2 Low Temperature
    PPG SigmaCover 2 / Amerlock 2 Low Temperature

    A 2 pack, fast drying, high solids, low temperatures epoxy coating for concrete and steel. LUL Cert 1329.

    From £88.62 £73.85
per page

BS 8204 Part 6 Synthetic Resin Flooring Type Categorisation

BS 8204-6, Section 6.2 (following the FeRFA scheme) classifies the types, varying in thickness and surface finish:

FeRFA No Type Description Duty Typical Thickness
1 Floor Seal Applied in 2 or more coats. Generally solvent or water borne LD > 150μm
2 Floor Coating Applied in 2 or more coats. Generally solvent free LD / MD 150 - 300μm
3 High build floor coating Applied in 2 or more coats. Generally solvent free MD 300 - 1000μm
4 Multi-layer flooring Aggregate dressed systems based on multiple layers of floor coatings or flow-applied flooring, often described as sandwich systems MD / HD > 2mm
5 Flow-applied flooring Often referred to as ‘self-smoothing’ or ‘self-levelling’ flooring and having a smooth surface MD / HD 2 - 3mm
6 Resin screed flooring Trowel-finished, heavily filled systems, generally incorporating a surface seal coat to minimise porosity MD / HD > 4mm
7 Heavy duty flowable flooring Having a smooth surface HD / VHD 4 - 6mm
8 Heavy duty resin flooring Trowel-finished, aggregate filled systems effectively impervious throughout their thickness. VHD > 6mm

LD – light foot traffic, occasional rubber tyre vehicles, MD – regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys, HD – constant fork lift truck traffic, hard plastic wheeled trolleys, some impact, VHD – severe heavily loaded traffic and impact