Coo-Var Q124 Dampshield is a 2 pack floor sealer, formulated with a damp proof membrane (DPM) that is suitable for screeds, coatings and other floor coverings such as carpet, vinyl and wood and also works as a suitable primer for use on masonry swimming pools.
Coo-Var Q124 Dampshield is a gas permeable damp proof membrane that can be used for earlier access than would otherwise be available for screeds, coatings and other floor coverings such as carpet, vinyl and wood.
Coo-Var Q124 Dampshield can be applied using a roller to produce a clear gloss finish on floors, with a drying time of 24 hours. Coo-Var Q124 Dampshield can be over coated after 12-24 hours for a more protective surface, with a theoretical coverage rate of 20m2 per unit. Damp shield is available in 5kg containers.
Coo-Var Q124 Dampshield can be used as a primer on masonry swimming pools as well as being a floor sealant for floor coverings such as carpet, vinyl and wood.
|VOC Content:||10.0g per Litre|
|Suitable Substrates:||For concrete floors and fine concrete screeds|
|Application Method:||Lambswool Roller|
|Theoretical Coverage:||20 m2 per 5 Kg pack|
|Wet Film Thickness (WFT):||230 microns|
|Dry Film Thickness (DFT):||230 microns|
|Pot Life:||30 minutes at 20°C|
|Overcoatable:||After 12 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 16|
|Shelf Life:||2 years unopened in original container|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.